Analysis on the difference between air cooling and water cooling of electromagnetic heating control panel

This article is uploaded and provided by users of Jiangxin electromagnetic heater

People who have used the electromagnetic heating control panel will have such questions? Is it better to use water cooling or air cooling for the electromagnetic heating control panel?

After the electromagnetic heating control panel is powered on for a period of time, the electromagnetic movement will gradually heat up with the length of operation time. At this time, the control panel will be hot and hot. At this time, it is necessary to cool the control panel. In order to avoid stopping the heating operation of the electromagnetic heating control panel due to its own overheating protection due to the high temperature of the control panel, The control panel needs water cooling or air cooling to reduce the temperature and achieve a continuous operation effect.

Air cooling - because its cooling method is to use an electric fan to cool down. Usually, when the manufacturer leaves the factory, an electric fan will be installed in the electromagnetic heating control panel. When the power supply is connected for operation, the electric fan will start to operate to cool the machine, which is the same as the operating principle of the electric fan in the computer host. Its advantage is that it is easy to install, does not need to be connected to the pipeline, does not need to have requirements for water quality, and will not be affected by the climate and environment. It can be used in the north and south.

Water cooling - electromagnetic heating control panel is to directly apply water for cooling. It should be noted that the water used is preferably tap water or well water. Generally, the river water cannot be used directly. Because there will be some grass or sand particles in the river water, if the grass or sand particles are sucked in, the radiator pipe will be blocked and the water cooling and heat dissipation will not be carried out. Then the radiator will not be able to cool down, so it will immediately show overheating maintenance and stop the heating operation. In addition, for northern areas or some colder areas, it is not suitable to use the water-cooled electromagnetic heating control panel. Because the temperature is too low, the water may freeze, so it cannot achieve the role of water cooling. In the south area, the water-cooled electromagnetic heating control panel is more suitable.

Difference between air cooling and water cooling of electromagnetic heating control panel

After understanding the air cooling and water cooling of the electromagnetic heating control panel, which method is better? We should also think comprehensively according to the area of use and so on.

"Statement: This article is adapted from a true story. Please respect the author Jiang Xin, electromagnetic heater, electromagnetic induction heater, electromagnetic heating controller, Foshan electromagnetic heating equipment manufacturer, http://www.jonson-ih.com The reproduction of civilization is also a virtue. Reprint, please keep the link!