Jiangxin electromagnetic heater shares the introduction knowledge of 40kW electromagnetic heating controller parameters

This article is uploaded and provided by users of Jiangxin electromagnetic heater

It is said that the electromagnetic heating controller will update the technology, and the new 40kW electromagnetic heating controller will bring our users a new heating experience with higher quality and more advantages!

1、 Electrical parameters of 40kW electromagnetic heating controller

1. Rated input voltage: AC380V (three-phase four wire)

2. Working voltage range: ac330v ~ A * * 20V

3. Working frequency: 50Hz / 60Hz

4. Resonance frequency: 18khz-35khz

5. Rated power: 30 kW ± 5%

6. Rated working current: 45 amp

7. Power output control: fifth gear control 20%, 40%, 60%, 80%, 100%

8. Start time: less than 5 seconds

Detailed parameter introduction of Jiangxin 40kW electromagnetic heating controller

2、 Environmental requirements for 40kW electromagnetic heater

1. Temperature: - 20 ℃ ~ 45 ℃

2. Humidity: ≤ 95%

3. Keep the equipment away from steam, range hood and dust. Do not block the air inlet and outlet of the equipment to ensure the air cooling effect. There is no conductive dust, corrosive gas and corrosive gas around, and there is no obvious vibration and turbulence.

3、 Performance description of 40kW electromagnetic heater

1. The product has many protection functions such as overheating, overcurrent, overvoltage, phase loss, surge, undervoltage, Ig * * short circuit, open circuit, coil short circuit and open circuit, ensuring the safe and stable operation of the equipment.

2. Full bridge phase-shifting technology and dual core high-power devices adopt the world famous German Infineon IGBT module.

3. IGBT drive adopts the ultra-high speed optocoupler of Agilent (HP), and the nanosecond processing speed ensures the stability of signal transmission and faster protection in case of failure.

4. The control core part adopts Samsung high-speed digital processing chip, which can monitor the working state of the equipment in real time.

5. The industrial design of the product and the original soft start function ensure the stability and super anti-interference ability of the equipment for long-time operation under the condition of frequent opening.

6. In terms of heat dissipation, several Taiwan high-speed and high-quality turbine fans are adopted, and the strong air volume makes the equipment cold.

7. Multi segment power output control, high power factor, mature and stable PLL technology.

8. The mutual interference of more than 720kw devices can not be realized at the same time.

Detailed parameter introduction of Jiangxin 40kW electromagnetic heating controller

4、 Features of 40kW electromagnetic heater

1. Isolated power supply design to ensure personal safety.

2. High thermal efficiency, greater than or equal to 90%.

3. Power subsection control, energy saving is more prominent.

4. Industrial quality design, safe and reliable.

5. Modular design, more convenient maintenance.

6. The cooling fan adopts Taiwan high-speed and high-quality turbine fan.

7. When a fault occurs, the equipment will prompt the corresponding fault code, so that you can see it at a glance and quickly help you solve the problem.

Detailed parameter introduction of Jiangxin 40kW electromagnetic heating controller

5、 Application field of 40kW electromagnetic heater

1. Energy saving transformation of wood, chemical industry, medicine, food, energy, printing, building materials, plastic machinery and other industries.

6、 Precautions for 40kW electromagnetic heater

1. The front power supply of the equipment must be connected to the air leakage switch as required.

2. The equipment must be reliably grounded in strict accordance with the requirements, otherwise it may cause electric shock or fire. The grounding wire shall be connected to the professional grounding device of the building, and the grounding wire shall not be connected to the water pipe or gas pipe.

3. The line must be installed by professional electricians and in accordance with the national Wiring Regulations. The cable needs to be put into the copper wire nose and welded well with solder after tightening.

4. Be sure to check whether all parts have been completed as required before power on.

5. When the equipment is not used, the power supply must be cut off.

6. When the equipment is in normal operation, it is strictly prohibited to touch the wiring terminals inside and outside the equipment.

7. Before the initial use, the power adjustment knob should be adjusted low counterclockwise. After heating after startup, slowly adjust the knob clockwise to the appropriate position. The current should be adjusted according to different process requirements.

8. If the equipment needs maintenance or overhaul, stop working, disconnect the power supply and wait for 3-5 minutes before maintenance.

"Statement: This article is adapted from a true story. Please respect the author Jiang Xin, electromagnetic heater, electromagnetic induction heater, electromagnetic heating controller, Foshan electromagnetic heating equipment manufacturer, http://www.jonson-ih.com The reproduction of civilization is also a virtue. Reprint, please keep the link!