Cabinet Type 10kW/15kw Electromagnetic Heater
Rated power: 10kW / 15kw
Rated voltage frequency: 220V / 50Hz / 60Hz
Voltage applicable range: 320v ~ 440V
Applicable ambient temperature: - 20 ~ 40 ° C
Applicable ambient humidity: ≤ 95%
Power regulation range: 20% ~ 100%
Heat conversion efficiency: ≥ 98%
Effective power: 10kW / 15kw
Operating frequency: 5 ~ 40KHz
Floor mounted 10kW and 15kw electromagnetic heaters adopt high-speed DSP operation and original German variable frequency drive technology. It has the characteristics of high reliability and long service life. It can be applied to diffusion pump, small water feeding machine, reactor, small boiler or pipeline heating. It has built-in independent PID temperature control system, which can easily save energy by 20-50%.
Under the same conditions
1、The preheating and cooling time is 1/3 shorter than the original resistance plate.
2、Save 30%~60% ofheating power consumption than the original heating method.
3、Safety, environmental protection, no open flame,effectively reduce the workshop room temperature.
4、long life, up to 50,000 hours or more,low maintenance costs.
5、does not affect the vacuum, does not affect the pumping speedto achieve the above effect at the same time,does not affect the time to do a furnace products.
6、product warranty of12 months, lifelong technical support.
Technical Parameters
1.Ambient temperature: -40~60
2.Ambient humidity: below 90%
3.power supply: voltage: 380V ±15% frequency 50Hz ~ 60Hz three-phase five-wire system
4.output power: see the specifications of the machine nameplate
5.with soft-start heating/stopping mode.
0~10V 0~5V
4~ 20mA linear transmission and variable gear adjustment
RS-485 communication and other diversified control functions
